Plasmas are the most common substance in the visible
universe, and our ability to create them has led to their routine use in a wide range of industrial
applications. In recent years, the ability to create room-temperature cold plasmas at atmospheric
pressures has driven strong interest in developing them for biomedical applications. A handful
of prototype cold-plasma devices are now being tested for clinical use.
Arc welding machines use searing-hot
plasmas to cut and weld metals, and plasmas play a key role in nuclear fusion. But cold plasmas also
have their applications. They are used in flat-screen plasma TVs, in the processing of plastics,
and for the application of coatings in materials processing. Because they generate free electrons
that react easily with other atoms, plasmas can be used to etch metals, to fabricate electronic
circuits in the semiconductor industry, and to burn off organic contaminants via chemical reactions
during wafer manufacturing.
"Cold" is a relative term:
Many cold plasmas have temperatures on the order of 100 °C. That is far too hot to be applied
safely to biological cells, but cold plasmas have proven useful for decontaminating surfaces
and sterilizing drinking water, according to Karl Schoenbach, who heads a new center for bioelectrics
at Old Dominion University (ODU) in Virginia.
Cold plasmas inactivate
bacteria through a combination of the plasmas' free radicals, charged particles, and emitted
UV radiation, all of which work together to disrupt the integrity of bacterial cell membranes.
For example, experiments funded by the US Air Force Office of Scientific Research have demonstrated
that plasmas can break down within minutes the complex chemicals found in nerve gases and biological
toxins such as anthrax, compared with the hours required for standard decontamination methods.
"Radicals can denature
proteins and oxidize the lips of the cell membrane," explains Mounir Laroussi, who has been researching
cold plasmas for almost two decades and is now director of ODU's Laser and Plasma Engineering Institute.
"UV radiation can damage the DNA strands, while charged particles can charge the cell wall and cause
electrostatic disruption."
A critical breakthrough
occurred when researchers succeeded in developing techniques to create truly room-temperature
plasmas at atmospheric pressures in the laboratory. "The technology [of cold ionized gases] has
matured to such a degree that there are now working devices on the market, and doctors are starting
to use them in their clinical practice," says Laroussi.
ODU's center for bioelectrics
opened in 2003 with a $5 million grant from the US Air Force Office of Scientific Research. The center
operates jointly with the Eastern Virginia Medical School to study how electromagnetic fields
and ionized gases interact with biological cells. Fully half of its research program is devoted
to the use of cold plasmas in medicine. Numerous start-up companies scattered across the US have
prototype cold-plasma technologies in various stages of development, and in Europe, rudimentary
cold-plasma "jet guns" are already being sold to medical professionals. In October, a group of
plasma scientists, medical professionals, biologists, and biochemists gathered in Corpus Christi,
Texas, for the first International Conference on Plasma Medicine.
Surgery without cutting
Eva Stoffels-Adamowicz of Eindhoven
University of Technology in the Netherlands has called cold plasma "the surgery of the future,"
although, technically, it is "surgery without cutting." Cold plasmas have been shown to cause
cells to temporarily detach from each other, and the detachment makes it easier to remove dead or
diseased cells or to move healthy cells to an injured area to accelerate wound healing. During the
healing process, bacteria, dead cells, and other debris are removed, and chemicals are released
that prompt new cells to migrate to and proliferate at the wound site, where they gradually rebuild
the tissue.
Stoffels-Adamowicz has
developed a plasma needle for precise removal or manipulation of cells and for bacterial disinfection
of wounds and dental cavities. Her device is a thin tungsten wire about 50 mm long, housed in a gas-filled
quartz tube. Driving a voltage through the needle generates a small plasma spark at the tip. She
hopes to further improve the device by including a scanning probe in the needle: a smart sensor capable
of detecting surface irregularities in living tissue. That improvement will result in more precise
control over the plasma tool. Eventually the plasma needle might be used to remove tumors or skin
cancers.
The kind of plasma produced
can make a difference. In the semiconductor industry, fluorine plasmas are used in etching applications,
while oxygen plasmas are useful for removing organic contaminants. For biological decontamination,
air is often preferred because air contains both oxygen and nitrogen and thus produces highly reactive
plasmas. Stoffels-Adamowicz's plasma needle produces nitric oxide, which the body uses to fight
infection and inflammation.
For his handheld plasma
pencil, ODU's Laroussi opted for helium because its effective heat dissipation keeps the discharge
cool and the plasma stable. The plasma pencil then can be safely applied to delicate surfaces, such
as human skin, and can kill bacteria without damaging surrounding tissue. Unlike Stoffels-Adamowicz's
plasma needle, which generates small plasmas of very short lengths, the pencil creates a long plasma
plume measuring up to 5 centimeters.
The trick to producing
a stable, room-temperature plasma of that length is to pulse the electrical energy source as much
as 1000 times per second, according to Laroussi. "The timed pulses keep the temperature down and
energize the plasma plume so that it reaches 2 inches past the end of the pencil," he says. The plasma
does not arc or overheat, even during long periods of use.
Laroussi has conducted
experiments to demonstrate that the plasma beam can kill Escherichia coli, for example,
with no adverse effect on surrounding skin. Other groups have demonstrated the effectiveness
of cold plasmas in destroying various kinds of viruses and bacteria, including salmonella. Further
refinements could make the device suitable for removing dental plaque or cancerous tissue. The
plasma pencil appears to kill bacterial cells selectively, perhaps because they are simpler in
structure and their DNA is not as well protected as in mammalian cells.
To make sure that the cold
plasmas weren't killing healthy cells and thus hindering regeneration in the wound-healing process,
Laroussi and several colleagues conducted simple experiments using worms, cutting their tails
and applying the plasma pencil to the wound. "If it didn't grow back, we would know we had done something
bad to the normal cells," he said. "But they all grew back, so we have a preliminary indication that
this plasma has a non-negative effect on cell regeneration."
A "bloodless scalpel"
Yet another prototype device is the
plasma blade system being developed by Peak Surgical (Palo Alto, California). For decades surgeons
have relied on scalpels to cut skin and delicate tissues, but such tools don't control bleeding.
Electrosurgical devices can both cut precisely and control bleeding by cauterizing the wound
site, but they also cause thermal damage to surrounding tissue. The plasma blade system offers
surgeons the best of both worlds by enabling them to cut precisely and control bleeding using a highly
focused plasma concentrated at the very edge of the device, without heat damage to surrounding
healthy tissue.
The plasma blade differs
from both the needle and the pencil in that the plasma actually makes cuts, while it simultaneously
reduces bleeding. Platelets, which are critical to blood clotting, are activated by cold plasmas,
although the exact mechanism is not yet understood. The cold plasmas also fight infection, reduce
inflammation, and thereby accelerate wound healing.
Originally developed
at Stanford University and licensed by the company for commercialization, the plasma blade uses
RF energy produced by a small 4-MHz generator about the size of a DVD player. "The pulsed energy hits
the target tissue and starts to break it down into charged particles, creating a plasma cloud,"
says Andre Bessette, Peak Surgical's vice president of marketing. "This plasma cloud acts as a
conductive medium to allow more energy transmission at lower power. The lower temperatures lead
to less thermal damage."
The instrument tip is a
proprietary insulated electrode made out of metal, stainless steel or tungsten. The plasma forms
right at the metal tip, which never touches the tissue. The system has been successfully tested
on retinal tissue; the most recent clinical studies on healing of surgical incisions were conducted
using pig skin. Those studies found that use of the plasma blade system resulted in "stronger, faster
wound healing" compared with conventional scalpels and electrosurgery techniques, according
to Peak Surgical CEO John Tighe. "Compared to a scalpel, we had 60% less bleeding," a finding that
led him to dub the blade a "bloodless scalpel."
There is still a tremendous
amount of scientific investigation to be done, according to Schoenbach, who sees a need for more
funding of basic research on cold plasmas. "We don't understand very much about the underlying
mechanisms" of these emerging tools, he explains. Cold plasmas effectively kill bacteria and
improve blood coagulation, "But what is causing these effects, and how can we gain better control
over the plasmas?"
For the researchers working
on cold plasmas for biomedical applications, the current crop of crude devices poised for clinical
use is just the beginning of a broader trend. "We are on the cusp [of greater things]," says Laroussi.
"We think cold plasma will have an increasingly bigger role to play in healthcare and could revolutionize
the way in which plasmas can be used in medicine."
Featured Jobs
